Bangle.js 2 JavaScript Smart Watch Gets nRF52840 MCU, New Design (Crowdfunding)

0

The Bangle.js 2 is an improved and upgraded version of the hackable Bangle.js JavaScript smartwatch based on the NordicSemi nRF52832 SoC which was introduced in 2019 with the open source ESPruino firmware.

The new watch features a new rectangular design, a Nordic Semi nRF52840 SoC that offers four times the RAM, twice the built-in and external flash, as well as an always-on, sunlight-readable screen with a plug-in socket. full touchscreen charge and improved bluetooth signal strength. .

Specifications of Bangle.js 2:

  • MCU – Semi Nordic nRF52840 Cortex-M4 MCU @ 64MHz arm with Bluetooth LE, 256 KB of RAM, 1 MB of on-chip flash memory
  • Storage room – 8 MB shine
  • Display – 1.3 inch 176 × 176 3-bit color LCD always-on display (LPM013M126) with backlight, full touch screen
  • Connectivity
    • Bluetooth 5.0 LE with support for advertising, central and peripheral modes
    • GPS / Glonass receiver
  • Sensors
    • Heart rate monitor
    • 3-axis accelerometer, 3-axis magnetometer
    • Air pressure / temperature sensor
  • Miscellaneous – Vibration motor
  • Debugging / Programming – Full SWD debugging port on the back of the watch
  • Battery – 200 mAh battery for more than 2 weeks standby
  • Dimensions – Watch body 43 x 36 x 12 mm, with standard 20 mm watch straps
  • IP protection rating – IP67 – Waterproof to a depth of 1 meter for 30 minutes
Bangle.js 2 vs Bangle.js open source JavaScript smartwatch
Bangle.js 2 vs. Bangle.js

The watch is preprogrammed with ESPruino firmware which allows you to encode and debug the device wirelessly using JavaScript or a graphics editor. It supports most ES5 JavaScript features and several ES6 features such as regular expressions, promises, arrow functions, and pattern literals. If you don’t feel like making your own JS app, you can download one that suits your needs from the App Store.

Some of the other firmware highlights include a graphics library with scalable fonts, bitmap rotation and scaling, Tensorflow Lite for microcontrollers, wear-level flash file system, heat-shrink compression and Support for VT100 terminal on LCD display. Open source smartwatch with JavaScriptBangle.js 2 was recently launched on Kickstarter and has already surpassed its goal of 8,192 GBP ($ 11,201 US) with more than $ 80,000 raised to date. Rewards start at $ 81 for a Bangle.js 2 smartwatch with a wristband, magnetic USB charging cord, and getting started instructions. Shipping adds 8 GBP to the UK and around $ 21 to the rest of the world. It’s much more than the PineTime watch, but the Bangle.js 2 has better specs, and most of the proceeds will be used to fund software development for ESPruisno firmware. Deliveries are expected to start around mid-November.

Support CNX software! Donate via Pay Pal Where crypto-currencies, become a patron on Patreon, or buy sample reviews


Source link

Share.

About Author

Leave A Reply